1 www.pduke.com 2014/04/30 asr01-series dc-dc converter 7vdc~ 32vdc wide input range up to 15watts features applications ? pin-out compatible with lm79xx linear regulators ? small size and low profile : 0.46 x 0.30 x 0.65 inch ? low standby power ? over-current protection ? short circuit protection ? over-temperature protection ? safety meets ul60950-1, en60950-1, & iec60950-1 ? ce marked ? compliant to rohs ii & reach ? wireless network ? telecom/datacom ? industry control system ? distributed power architectures ? semiconductor equipment non iosolation low standby power ocp scp otp technical specification all specifications are typical at nominal input, ful l load and 25 otherwise noted output current efficiency input range output voltage @min.load @fullload input current @ no load min.vin max.vin maximum capacitor load model number vdc vdc a a ma % % f asr01-12s05 -7 ~ -32 -5 -0.1 -1 -3 91.5 84.5 1600 ASR01-12S5P2 -7 ~ -32 -5.2 -0.1 -1 -3 92.0 85.0 1600 asr01-12s06 -8 ~ -32 -6 -0.1 -1 -3 92.5 86.5 1000 asr01-12s08 -10.5 ~ -32 -8 -0.1 -1 -3 94.0 89.0 1000 asr01-24s09 -11.5 ~ -32 -9 -0.1 -1 -3 94.5 90.5 1000 asr01-24s12 -15 ~ -32 -12 -0.1 -1 -3 96.0 92.0 470 asr01-24s15 -18 ~ -32 -15 -0.1 -1 -3 96.0 93.5 470 part number structure asr01 - 12 s 05 - a series name input voltage (vdc) output quantity output voltage (vdc) assembly option 12: 24: -7 ~ -32 -8 ~ -32 -10.5 ~ -32 -11.5 ~ -32 -15 ~ -32 -18 ~ -32 s: single 05: 5p2: 06: 08: 09: 12: 15: -5 -5.2 -6 -8 -9 -12 -15 : a: standard horizontal type
asr01 2 www.pduke.com 2014/04/30 input specifications parameter conditions min. typ. max. unit operating input voltage range asr01-12s05 ASR01-12S5P2 asr01-12s06 asr01-12s08 asr01-24s09 asr01-24s12 asr01-24s15 -7 -7 -8 -10.5 -11.5 -15 -18 -12 -12 -12 -12 -24 -24 -24 -32 -32 -32 -32 -32 -32 -32 vdc start up time constant resistive load power up 15 ms rise time time for vo to rise from 10% to 90% of vo 10 ms input reflected ripple current -12vin(nom) -24vin(nom) 100 100 map-p maximum input current vin=vin(min); io=io(max) -1 a input filter capacitor type output specifications parameter conditions min. typ. max. unit voltage accuracy -2.0 +2.0 % line regulation low line to high line at full load -1.0 +1.0 % load regulation 10% full load to full load standard type suffix-a -0.5 -0.6 +0.5 +0.6 % ripple and noise measured by 20mhz bandwidth -5vout -5.2vout -6vout -8vout -9vout -12vout -15vout 50 50 75 75 75 75 75 mvp-p temperature coefficient -0.015 +0.015 %/ dynamic load response 50% load step change peak deviation recovery time 5 250 %vo s over load protection % of iout rated; hiccup mode -2.0 a short circuit protection continuous, automatics recovery general specifications parameter conditions min. typ. max. unit switching frequency 12s05,12s5p2 others 323 425 380 500 437 575 khz safety meets ul60950-1 en60950-1 iec60950-1 case material non-conductive black plastic potting material silicone (ul94 v-0) weight 3.1g(0.11oz) mtbf mil-hdbk-217f, full load 8.475 x 10 6 hrs environmental specifications parameter conditions min. typ. max. unit operating temperature range -40 +85 over temperature protection internal ic junction +165 storage temperature range -55 +125 thermal shock mil-std-810f vibration mil-std-810f relative humidity 5% to 95% rh caution: this power module is not internally fused. an input line fuse must always be used.
asr01 3 www.pduke.com 2014/04/30 characteristic curve asr01-12s05 derating curve asr01-12s05 efficiency v s input voltage asr01-12s05 efficiency vs output lo ad mechanical drawing for stardands asr01- s vertical sip type 1. all dimensions in inch (mm) tolerance: x.xx 0.02 (x.x 0.5) x.xxx 0.01 (x.xx 0.25) 2. pin pitch tolerance 0.01(0.25) 3. pin dimension tolerance 0.004 (0.1) pin connection pin define 1 gnd 2 -vin 3 -vout mechanical drawing for suffix-a asr01- s -a horizontal sip type 1. all dimensions in inch (mm) tolerance: x.xx 0.02 (x.x 0.5) x.xxx 0.01 (x.xx 0.25) 2. pin pitch tolerance 0.01(0.25) 3. pin dimension tolerance 0.004 (0.1) pin connection pin define 1 gnd 2 -vin 3 -vout
|
